Aerox™ Alkyd Enamels Alpine Green (E140)
ITEM # :
- For Interior & Exterior use
- Bright Colors
- Lead-Free
- Fade Resistance
- Heat Resistance upto 176°C (350°F)
- Air-Drying
- Used in wide range of applications on wood,hardboard, metal, drywall, plaster, concrete, masonry
- Ideal for Doors, Trim, Moulding, Cabinetry, Walls, Railings and Wrought Iron
Aerox™ Alkyd Enamels Alpine Green (E140)
ITEM # :
- For Interior & Exterior use
- Bright Colors
- Lead-Free
- Fade Resistance
- Heat Resistance upto 176°C (350°F)
- Air-Drying
- Used in wide range of applications on wood,hardboard, metal, drywall, plaster, concrete, masonry
- Ideal for Doors, Trim, Moulding, Cabinetry, Walls, Railings and Wrought Iron
- For Interior & Exterior use
- Bright Colors
- Lead-Free
- Fade Resistance
- Heat Resistance upto 176°C (350°F)
- Air-Drying
- Used in wide range of applications on wood,hardboard, metal, drywall, plaster, concrete, masonry
- Ideal for Doors, Trim, Moulding, Cabinetry, Walls, Railings and Wrought Iron
- Apply only to a clean, dry surface free from grease, wax, rust, etc. On previously painted surfaces.
- Test spray in a small inconspicuous area.
- Hold can 8″ to 12″ from surface.
- Spray in short, overlapping strokes to obtain even coverage.
- Do not use a continuous spray.
- It is better to apply two light coats than one heavy coat.
- Spray second coat within ½ hour or wait 48 hours for the paint to fully cure.
- If you miss the ½ hour “window”, the second coat may cause the paint to react and leave the paint with an “orange peel” effect. Dry Time (under normal conditions)
- Set to Touch 5-9 minutes,
- Tack Free 20-30 minutes,
- Hard Dry 15-24 hours
- Full Cure Time 48 hours
Do not use on horizontal surfaces subject to foot traffic.
| Size | 17.6 oz. can | ||
| Net Weight | 340 gm / 12 oz. | ||
| Units/Case Pack | 6 cans | ||
| UPC | |||
- For Interior & Exterior use
- Bright Colors
- Lead-Free
- Fade Resistance
- Heat Resistance upto 176°C (350°F)
- Air-Drying
- Used in wide range of applications on wood,hardboard, metal, drywall, plaster, concrete, masonry
- Ideal for Doors, Trim, Moulding, Cabinetry, Walls, Railings and Wrought Iron
- Apply only to a clean, dry surface free from grease, wax, rust, etc. On previously painted surfaces.
- Test spray in a small inconspicuous area.
- Hold can 8″ to 12″ from surface.
- Spray in short, overlapping strokes to obtain even coverage.
- Do not use a continuous spray.
- It is better to apply two light coats than one heavy coat.
- Spray second coat within ½ hour or wait 48 hours for the paint to fully cure.
- If you miss the ½ hour “window”, the second coat may cause the paint to react and leave the paint with an “orange peel” effect. Dry Time (under normal conditions)
- Set to Touch 5-9 minutes,
- Tack Free 20-30 minutes,
- Hard Dry 15-24 hours
- Full Cure Time 48 hours
Do not use on horizontal surfaces subject to foot traffic.
| Size | 17.6 oz. can | ||
| Net Weight | 340 gm / 12 oz. | ||
| Units/Case Pack | 6 cans | ||
| UPC | |||
