AEROX™ Mould Cleaner (AX104)
ITEM # :
- Non Chlorinated solvent.
- High Pressure spraying.
- Fast evaporating.
- Quickly Removes dirt,oil,grease, grime and other contaminants.
- Convenient method for removal of mold release, grease, oil and wax build-up on mold surfaces.
- Restore smooth molding operation.
- User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.
In stock
AEROX™ Mould Cleaner (AX104)
ITEM # :
- Non Chlorinated solvent.
- High Pressure spraying.
- Fast evaporating.
- Quickly Removes dirt,oil,grease, grime and other contaminants.
- Convenient method for removal of mold release, grease, oil and wax build-up on mold surfaces.
- Restore smooth molding operation.
- User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.
In stock
- Non Chlorinated solvent.
- High Pressure spraying.
- Fast evaporating.
- Quickly Removes dirt,oil,grease, grime and other contaminants.
- Convenient method for removal of mold release, grease, oil and wax build-up on mold surfaces.
- Restore smooth molding operation.
- User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.
- Use product in well-ventilated area.
- Warm can be room temperature.
- Protect rubber parts from overspray.
- Spray liberally on area to be cleaned.
- Repeat as necessary.
- To expel entire contents, hold can at 45° angle and rotate until all contents have been discharged.
- Before using, cover any area not being cleaned. Hold can 12-14 inches from the surface to be sprayed. Saturate parts as needed and wipe clean, with lint free cloth to remove surface contamination. Store at room temperature. Do not use on electrical equipment or machinery while in operation.
- Refer to the Material Safety Data Sheet for specific information on material hazards, etc.
| Size | 22 oz. can | ||
| Net Weight | 345 gram | ||
| Units/Case Pack | 12 cans | ||
| UPC | 786468806056 | ||
- Non Chlorinated solvent.
- High Pressure spraying.
- Fast evaporating.
- Quickly Removes dirt,oil,grease, grime and other contaminants.
- Convenient method for removal of mold release, grease, oil and wax build-up on mold surfaces.
- Restore smooth molding operation.
- User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.
- Use product in well-ventilated area.
- Warm can be room temperature.
- Protect rubber parts from overspray.
- Spray liberally on area to be cleaned.
- Repeat as necessary.
- To expel entire contents, hold can at 45° angle and rotate until all contents have been discharged.
- Before using, cover any area not being cleaned. Hold can 12-14 inches from the surface to be sprayed. Saturate parts as needed and wipe clean, with lint free cloth to remove surface contamination. Store at room temperature. Do not use on electrical equipment or machinery while in operation.
- Refer to the Material Safety Data Sheet for specific information on material hazards, etc.
| Size | 22 oz. can | ||
| Net Weight | 345 gram | ||
| Units/Case Pack | 12 cans | ||
| UPC | 786468806056 | ||
