Aerox™ Mine Marking Paint -Evergreen (AS501)
ITEM # :
- Water-base Paint.
- Spray in upright position.
- A fast drying marking paint.
- Penetrates and adheres to uneven surfaces.
- Low odours
- Non-clogging
- For Color code piping, heating and cooling ducts and overhead marking.
- To mark overhead surfaces in mines, excavation sites, underground utilities and bridges
Aerox™ Mine Marking Paint -Evergreen (AS501)
ITEM # :
- Water-base Paint.
- Spray in upright position.
- A fast drying marking paint.
- Penetrates and adheres to uneven surfaces.
- Low odours
- Non-clogging
- For Color code piping, heating and cooling ducts and overhead marking.
- To mark overhead surfaces in mines, excavation sites, underground utilities and bridges
- Water-base Paint.
- Spray in upright position.
- A fast drying marking paint.
- Penetrates and adheres to uneven surfaces.
- Low odours
- Non-clogging
- For Color code piping, heating and cooling ducts and overhead marking.
- To mark overhead surfaces in mines, excavation sites, underground utilities and bridges
- Hold can 8″ to 12″ from surface.
- Spray in short, overlapping strokes to obtain even coverage.
- Do not use a continuous spray.
- It is better to apply two light coats than one heavy coat.
- Spray second coat within ½ hour or wait 48 hours for the paint to fully cure.
- If you miss the ½ hour “window”, the second coat may cause the paint to react and leave the paint with an “orange peel” effect. Dry Dry Time (under normal conditions)
- Set to Touch 5-9 minutes,
- Tack Free 20-30 minutes,
- Hard Dry 15-24 hours
- Full Cure Time 48 hours
| Size | 17.6 oz. can | ||
| Net Weight | 340 gm / 12 oz. | ||
| Units/Case Pack | 6 cans | ||
| UPC | |||
- Water-base Paint.
- Spray in upright position.
- A fast drying marking paint.
- Penetrates and adheres to uneven surfaces.
- Low odours
- Non-clogging
- For Color code piping, heating and cooling ducts and overhead marking.
- To mark overhead surfaces in mines, excavation sites, underground utilities and bridges
- Hold can 8″ to 12″ from surface.
- Spray in short, overlapping strokes to obtain even coverage.
- Do not use a continuous spray.
- It is better to apply two light coats than one heavy coat.
- Spray second coat within ½ hour or wait 48 hours for the paint to fully cure.
- If you miss the ½ hour “window”, the second coat may cause the paint to react and leave the paint with an “orange peel” effect. Dry Dry Time (under normal conditions)
- Set to Touch 5-9 minutes,
- Tack Free 20-30 minutes,
- Hard Dry 15-24 hours
- Full Cure Time 48 hours
| Size | 17.6 oz. can | ||
| Net Weight | 340 gm / 12 oz. | ||
| Units/Case Pack | 6 cans | ||
| UPC | |||
