Category: Industrial
Category: Industrial
-
- Wall Mounted Adjustable Height Magnetic Aerosol and Spray Can Holder
- Holds 3 Spray Cans
- Size: 12" x 4" x 6"(305*102*152mm)
- 3 hidden rubber coated magnets on the back
- Maximum Diameter: 3"
- Capacity: 7LBS
- Professional Grade
-
- Provide a uniform base for enamel or lacquer finishes, effectively sealing out moisture.
- Offer superior bonding and dry to the touch within minutes.
- Sandable primers to build up repaired metal areas to a smooth, even surface.
- Dries to the touch within 5 minutes and may be re-coated in one hour.
- Can be sanded- wet or dry. One mil dry film thickness is recommended.
- Priming ensures better adhesion of paint to the surface & increases paint durability.
- Provides additional protection for the material being painted.
- 340 gm/ 12 oz
-
- Non Chlorinated solvent.
- High Pressure spraying.
- Fast evaporating.
- Quickly Removes dirt,oil,grease, grime and other contaminants.
- Convenient method for removal of mold release, grease, oil and wax build-up on mold surfaces.
- Restore smooth molding operation.
- User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.
-
- Effectively cleans the evaporator coil and the cavity where the evaporator coil resides.
- Easy-to-use aerosol cleans the evaporator coils, the cavity and the drain hose.
- Remove any debris, musty soils, and dirt build up.
- The foamy product lifts dirt and absorbs excess moisture and condensation.
- Flushing the drain hose to prevent blockages and subsequent offensive odours.
-
- A heavy-duty, solvent-based aerosol cleaner which cleans effectively and dries quickly.
- Non-chlorinated.
- Clean air throttle valves.
- Idle air control valves and the internal surfaces of the air intake manifold.
- The 360-degree valve allows the user to direct the spray onto surfaces and linkages requiring cleaning.
- Into the intake manifold to clean varnish and dirt from the manifold walls, even with the can inverted.
- Oxygen sensor and catalytic converter safe.
-
- Provide the required coating, film strength and protection to fresh or exposed metal surfaces.
- After spraying on the surfaces, the flowable coating sets up to a semi-soft, translucent to clear film.
- Film remains soft and pliable, and will not peel, chip or crack.
- Convenient aerosol format provides ease of application.
- Use inside vehicle rocker panels, doors, truck tail gates, trunk lids.
- Use on any surface that requires corrosion protection.
- Can be applied in multiple coatings depending on degree of protection required.
- Will creep into cavities and hard-to-reach areas.
- Excels at salt spray corrosion tests.
-
- High-performance lubricant blend for use on all exposed roller chains.
- Provide lubrication and corrosion protection, as well as good penetration to points of contact.
- Excellent extreme pressure, anti-wear, and anti-rust properties.
- Superior surface adhesion to resist water washout and mechanical displacement.
- Non-chlorinated carrier solvent to enhance environment preservation.
- OEM-approved service chemical.
-
- Aerosol Spray cans for wide application
- Alkyd enamel touch-up paints, to high performance 2K aerosols
- For quality repairs and on-site jobs
- Min paint qty. required to fill: 1 gallon
- Enamel Primers
- Enamel Topcoats
- Fluorescent Colours
- High Heat Spray Cans
- Weld-Thru Zinc Primer
- 2K Epoxy Primer
- 2K Urethane Topcoat
-
- Quickly and effectively dissolve and remove any oil, dirt and oxidation build-up on all types of electrical contacts, switches, terminals and connectors.
- The easy-to-use aerosol format and extension tube allow for direct and precise application of the cleaner to the affected contact surfaces, even in hard-to-reach or confined areas.
- Dries quickly and leaves no harmful residue.
- Non-chlorinated Formulation.
- OEM–approved service chemical.
-
- A proprietary blend of solvents, detergents and dispersant additives
- Effectively dissolve oil contaminants to aid in their removal from the engine.
- Thin out heavily oxidized or thickened oil and break down sludge and varnish deposits, which can then be drained out with the used oil.
- Remove Deposit Build-up
- Keep new oil clean
- Clean up what the filter misses
- Clean engine parts
-
- Heavy-duty lubricant and penetrant which uses a unique formulation
- Penetrate rust, lubricate surfaces and parts that are tight and binding,
- Repel moisture from surfaces.
- The foamy nature of the product assists in the product’s ability to stick to the surfaces it is sprayed on.
- Use for automotive, marine, shop and household applications.
- Applications
- Bolts & nuts
- Bearings
- Chains
- Corrode fasteners
- Equipment disassembly
- Hinges
- Plumbing fixtures
- Pulleys
- Gears & cogs
- Screws
- Shafts
-
- Rapid clean-up performance on fuel injectors.
- Clean-up performance on intake manifolds, intake valves and ports and the entire fuel system (fuel lines, fuel tank).
- Improved fuel combustion, resulting in increased power and performance.
- Reduced fuel consumption and emissions.
- Elimination of knocking and pinging caused by deposit build-up (hot spots) in the combustion chambers and prevention of engine octane requirement increase.
- Oxygen sensor and catalytic converter safe.
- OEM-approved service chemical.
